background image

User's Manual

3

15. To prevent electric shock

, do not use

this polarized plug with an extension cord,
receptacle or other outlet unless the
blades can be fully inserted to prevent
blade exposure.
Pour préevenir les chocs électriques ne
pas utiliser cette fiche polariseé avec un
prolongateur, un prise de courant ou une
autre sortie de courant, sauf si les lames
peuvent être insérées à fond sans laisser
aucune pariie à découvert.

16. Grounding or Polarization

 —

Precautions should be taken so that the
grounding or polarization means of the
Component is not defeated.

Safety Instructions ....................................... 2
Introduction .................................................. 4
Features ....................................................... 4
Unpacking .................................................... 4
Care

....................................................... 4

Overview ...................................................... 5
Control panel features ................................. 6
Installation .................................................... 8
Connections ................................................. 9
Location ..................................................... 10
System configurations ............................... 11
Adjusting the controls ................................ 15
Specifications ............................................. 16
Troubleshooting guide ............................... 17
Limited warranty ........................................ 19
Service assistance ..................................... 19

Contents

To find out more about this and other Sunfire products,

please visit our website: 

www.sunfire.com

This apparatus does not exceed the Class

A/Class B (whichever is applicable) limits
for radio noise emissions from digital
apparatus as set out in the radio
interference regulations of the Canadian
Department of Communications.

ATTENTION — Le présent appareil

numérique n'émet pas de bruits
radioélectriques dépassant las limites
applicables aux appareils numériques de
class A/de class B (selon le cas)
prescrites dans le règlement sur le
brouillage radioélectrique édicté par les
ministere des communications du
Canada.

WARNING:

THIS SUBWOOFER IS CAPABLE OF PRODUCING

SOUND PRESSURE LEVELS IN EXCESS OF 110 dB. YOU

MUST TAKE EVERY PRECAUTION TO PROTECT YOUR

HEARING FROM PERMANENT DAMAGE.

Содержание MK IV





















Отзывы: