Sunex 7793B Скачать руководство пользователя страница 2

7793B 

REV. F

 

rev. 2/24/20

WARNING INFORMATION

This is the safety alert symbol. It is used to alert you 
to potential personal injury hazards. Obey all safety 
messages that follow this symbol to avoid possible 
injury or death.

             

 

IMPORTANT: READ THESE INSTRUCTIONS BEFORE OPERATING

BEFORE USING THIS DEVICE, READ THIS MANUAL COMPLETELY AND THOROUGHLY UNDERSTAND ITS OPERATING 
PROCEDURES, SAFETY WARNINGS AND MAINTENANCE REQUIREMENTS.

It is the responsibility of the owner to make sure all personnel read this manual prior to using the device. It is also the responsibility of 
the device owner to keep this manual intact and in a convenient location for all to see and read. If the manual or product labels are lost 
or not legible, contact Sunex for replacements. If the operator is not fluent in English, the product and safety instructions shall be read 
to and discussed with the operator in the operator's native language by the purchaser/owner or his designee, making sure that the 
operator comprehends its contents.

THE NATURE OF HAZARDOUS SITUATIONS

The use of portable automotive lifting devices is subject to certain hazards that cannot be prevented by mechanical means, but only 
by the exercise of intelligence, care, and common sense. It is therefore essential to have owners and personnel involved in the use and 
operation of the equipment who are careful, competent, trained, and qualified in the safe operation of the equipment and its proper 
use. Examples of hazards are dropping, tipping or slipping of loads caused primarily by improperly secured loads, overloading, 
off-centered loads, use on other than hard level surfaces, and using equipment for a purpose for which it was not designed.

METHODS TO AVOID HAZARDOUS SITUATIONS

  •  Read, study, understand and follow all instructions before operating this device.
  •  Inspect the jack before each use. Do not use jack if damaged, altered, modified, in poor condition, leaking hydraulic fluid, or  
    unstable due to loose or missing components. Make corrections before using.
  •  Consult the vehicle manufacturer for the transmission's center of balance.
 • 

Do not crawl under transmission or place any part of your body under transmission at any time.

  •   Before moving, lower the load to the lowest possible height, ensure the load is centered and secure with a load restraint device.
  •   Secure the transmission to the jack's saddle with the anchorage restraint system provided before raising or lowering
    the transmission.
  •   Center load on saddle. Be sure setup is stable before working on vehicle.
  •  Never use a power tool to activate the saddle tilt screws. Operate by hand or socket wrench.
  •  Support the engine with a stand before unbolting the transmission from the engine.
  •   Wear eye protection that meets ANSI Z87.1 and OSHA standards (users and bystanders).
  •   Do not use jack beyond its rated capacity. Do not shock load. 
  •  Use only on a hard level surface capable of supporting the load. 
  •   Adequately support the vehicle before starting repairs.
  •   Use of this product is limited to the removal, installation and transportation in the lowered position, of transmissions, transfer  
    cases and transaxles.
  •   Do not use any adapters unless approved or supplied by Sunex.
  •   Always lower the jack slowly and carefully.
  •  Do not use (or modify) the product for any other purpose than that for which it was designed without consulting the  
    manufacturer's authorized representative.
  •   Failure to heed these markings may result in serious or fatal personal injury and/or property damage.

CONSEQUENCES OF NOT AVOIDING HAZARDOUS SITUATIONS

Failure to read this manual completely and thoroughly and failure to understand its OPERATING INSTRUCTIONS, SAFETY WARNINGS, 
MAINTENANCE INSTRUCTIONS and comply with them, and neglecting the METHODS TO AVOID HAZARDOUS SITUATIONS could 
cause accidents resulting in serious or fatal personal injury and/or property damage.

WARNING: Indicates a hazardous situation 
which, if not avoided, could result in death 
or serious injury.

WARNING

WARNING

WARNING

WARNING

WARNING: 

This product can expose you to chemicals including nickel, which is known to the State of California to cause 

cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Содержание 7793B






















Отзывы: