Connect the other side of provided FPC cable to
where the original FPC cable disconnected
Solder above two points for the sake of using
OEM touch screen in external mode
①
②
③
④
⑤
⑥
⑦
⑧
Disassemble the monitor
Disconnect marked original FPC cable at the
back side of monitor and connect original FPC to
the “TO LCD” of supplied FPC cable
11
Install provided support bracket and sub-board
as above and connect the other side of FPC
cable, supplied LVDS cable and touch cable to
sub-board
Take out the LVDS cable through the hole as
above and re-assemble monitor
1. Solder green wire as above
2. Remove the marked resistance
3. Solder red wire on where resistance removed
After soldering, take out the provided touch
cable and the other side of FPC cable through
the side hole of bracket
Remove
❶
❷
❶
❷
❸
❸
