2.9.1 Remote control button
16
①
First of all, press
◀
button on remote controller 2
seconds long. Then you can access to the FACTORY
mode. And go to IR MEMORY, UTIL.
There are two options in IR MEMORY as shown above;
DTV and DVD.
Then you select AV source that you want to set
among them.
②
This is a window for register of DVD’ s remote
control button value. At the moment just select a
menu that you want to save.
(Select “DTV in options of IR MEMORY” if you want to
save values of DTV’ s remote control. And follow the
instruction below.)
Instruction>
a. Select “POWER” in OSD menu, then press “OK” on
remote control. (as shown above)
b. If the marked area flickers as shown above, press
“POWER” button on the remote control of DVD that
you want to use. (continued in the next page)
Registering value of remote control buttons?
When you want to control DVD and DTV via touch screen (using OSD menu) with other models besides already
registered option-SANYO and NECVOX, you can register value of DTV and DTV’ s remote control which you have.
Then you can control DVD and DTV via touch screen.
>>>
CarNavi-Tech
