3.3 Installation
21
①
Here are pictures of the rear view of
the disassembled monitor and
command.
You can see that original LCD cable
of monitor is connected to the
command in the picture above.
3.3.1 Separating monitor, connecting LVDS-IN cable and LCD cable
②
Connect the original LCD cable to “TO MONITOR” of the
sub-board after disconnecting it from the command.
And connect the LCD cable enclosed in our package to
“TO SYS” of the sub-board. Then connect the opposite end
of the cable to the spot that the original LCD cable is
connected of command
Rear view of command
Rear view of monitor
CarNavi-Tech
