Drawn up by:
2009-01-23 / RK
OI06H-5118 SR 562
Revision:
01
Reviewed:
Page:
16 of 18
One coupling of the hose is fitted with an
o-ring. Thread the new hose with this end
first from the inside of the hood, through
the passage at the rear of the hood.
Note that the hose should not be drawn
all the way through, and around 20 cm
should be left on the inside of the hood.
Fit the new hose to the head harness in
the reverse order.
Grip the front part of the head harness
with one hand and insert the head
harness into the hood, first inserting the
rear part fitted with the hose.
