1.3 Electric safety directions
• When installing, repairing or servicing the heater it must be turned off and disconnected
from power. Before installation please check if the heater is free of damages.
• If the heater or the power cord is damaged in any form do NOT use the heater and contact
your Sundirect dealer for repair or replacement. Repairs, maintenance or any changes must
be carried out by an authorized Sundirect dealer.
• DO NOT attempt to repair the heater by yourself, this will void your warranty.
• If the heater has been dropped do NOT operate it and contact your Sundirect dealer to
make sure it is free of any damages.
• This heater is designed to operate at 220-240V, 50Hz AC. If your supply mains do not comply
with this, do NOT use the heater.
• The heater must not be located immediately below a socket-outlet
• WARNING: Do not use this heater in small rooms when they are occupied by persons not
capable of leaving the room on their own, unless constant supervision is provided.
2. How to care for your Sundirect heater
2.1 Cleaning
Always unplug your heater and let it cool down completely before cleaning. Never dip into water
and never splash water on it. Clean the heater with a soft damp cloth. For glass models use a soft
cloth and glass cleaner. Never use a wet cloth and make sure to dry the heater when clean with a
dry cloth. Do not use any abrasive materials, solvents or harsh cleaning sponges as this could cause
scratches or other irreparable damage. Before operating the heater again it must be completely dry.
2.2 Using/Working
Please note that the heater may discolor with use. This is due to airborne pollution and is not a fault.
Do not cover your heater with a picture foil and do not paint or print the heater yourself. This might
cause damage to the heating element and will void your warranty.
If you notice any noise, smells, visible changes or exceptionally high temperatures please
discontinue use and contact an authorized Sundirect dealer.
2.3 Repair
Repairs must be carried out by authorized Sundirect dealers or by Sundirect directly. If you attempt
to alter the product or to proceed with any repairs yourself it will void your warranty.
2.4 Positioning
This heater has a heating surface of 270 degrees, i.e. only the backside of the heater does not emit
heat. Please make sure the heater is facing room or objects you want to heat correctly.
5
