Sundirect Stone600-Pro, Инструкция по установке и эксплуатации

Страница: 8 / 20

4.4 Open window detection:
This heater is equipped with an open window detection function. If our control system detects that
the room temperature decreases dramatically in short period when the heater is in the heating
status, it will recognize that a window is open. The window sign on the screen will start to flash and
the heater will power off for 30 minutes and get back to the previous setting automatically after 30
minutes.
You can deactivate and activate this function by long pressing for 5 seconds the “-” button, and the
open window sign on the screen will disappear and appear accordingly.
4.5 Temperature calibration
Long press “+” button for 5 seconds to enter the temperature calibration, adjust the number by
pressing “-” or “+”
button, the calibration ranges from -5 to +5 degrees.
4.6 WIFI reset
If you change to a new router or if you would like to disconnect the heater from your current mobile
device you can reset the WIFI by following these steps: Turn on the heater and long press the “WIFI”
button for 5 seconds, then the WIFI signal on the screen will start to flash again.
4.7
Activate/deactivate WIFI function
Long press “Timer” button for 10 seconds to deactivate the WIFI function of this heater and the WIFI
sign on the screen will disappear, long press “Timer” button for 10 seconds to activate it on again.
4.8 Manual control:
To enter the manual mode, activate the power switch, press power button to power on the heater
and the “M” sign will show on the screen. Now the heater operates in the manual mode, adjust your
desired temperature by pressing “-” or “+” button, 2 seconds later the screen will retain to the
reading of current room temperature.
If you would like to set up the timer, press timer button and “00H” will appear on the screen and you
can set the timer by press “-” and “+” button to start the count-down timer.
Please notice that once the timer is set, the heater will automatically work under the manual
mode.
4.9 WIFI and APP operation:
4.9.1 Download the Sundirect Smart APP
Scan the bellow QR code to download the “Sundirect Smart” APP or search “Sundirect Smart” APP
on APP store or Google play store to start the procedure to download the APP, open the APP and
register with your phone number or Email address.
8