5.4 Bypass mode
Long-press the “P” button on Receiver01 until the
“Pair signal light” off and the “Heating status
signal light “on,
the panel will be reset to bypass mode. On the bypass mode, the Receiver01 is
disabled and the panel is connected directly to the electricity.
5.5 Installation
7
Note:
•
Note: The kit supplied in the package is
designed for mounting on a solid ceiling.
If
mounted onto other types of ceilings, you will
need appropriate fixings (not supplied).
Please
make sure the ceiling is safe to mount.
We
highly recommend to have the panel installed
by a qualified electrician or installer authorized
by Sundirect.
•
The SC series is a hot temperature infrared
heater. It has a surface temperature of
300-350°C when in operation. Please pay
special attention and mount them out of reach.
On the left, see the drawing of the mounting
requirements. When installing the space heater
to a ceiling or wall please make sure to keep a
distance of at least 20cm to the neighbouring
walls or ceilings and a minimum distance from
the floor of 2.2m.
•
The heater is designed to be used in outdoor
areas with minimal air movement. If used in
areas with strong winds, please note that the
heating performance might decrease. As a
solution, we suggest to mount the heater closer
to the objects you wish to heat to achieve a
better performance. Please make sure the
heater is protected from rain, it can withstand
splash water only.
22
00
20
0
＞
200
＞
200
Assembly Instructions
