1. Notice to Purchaser
Thanks for purchasing this Sundirect infrared heater. We hope you enjoy this innovative
technology and that this product will bring a pleasant atmosphere to your home.
Please read these instructions carefully and keep safe for future use. Failure to comply with these
instructions will void your warranty. Do not disassemble or tamper with the product at any time!
Please pay special attention to the safety instructions and use the heater according to these
instructions. Sundirect Technology Ltd. shall not be liable for any damage or loss occurred resulting
from failure to follow these instructions.
2. General Introduction
Sundirect Infrared heaters heat objects instead of the air, making this heater much more efficient
than traditional convection heaters.
The Sundirect Plus series represents a new generation of infrared panel heaters, equipped with a
built-in thermostat receiver inside of the junction box (Artcile Number: Receiver01) on the backside
of the panel. It needs to be used in conjunction with the Sundirect control system - Smart 1.0/ Smart
1.0Pro or Smartplug (NOT included in the box) - in order to meet the Ecodesign legislation of the
EU/EC Directive 2009/125/EC.
You may find detailed specifications and instructions in the manual of Smart 1.0/1.0Pro or SmartPlug
separate from this manual.
This product complies with the LVD guideline 2014/35/EU and the EMC guideline 2014/30/EU and
meets the following standards:
EN 60335-1:2012/A2:2019
EN 60335-2-30:2009/A12:2020
EN 62233:2008
AfPS GS 2019:01 PAK
EN 55014-1:2017/A11:2020
EN 55014-2:2015
EN IEC 61000-3-2:2019
EN 61000-3-3:2013/A1:2019
2014/53/EU
《
RED
》
(LVD 2014/35/EU & EMC 2014/30/EU)
2011/65/EU, 2015/865/EU
《
RoHS
》
2015/1188/EC
《
Erp
》
3
EN
