4. Operation:
4.1 General introduction of the smart control
This footwarmer heater has an integrated WIFI control box on the back side, meaning there is no
other additional thermostat needed to control the heater. Once the heater has been connected to
the APP, the smartphone will take control and communicate with the control box. If your home
internet is not working, it is still possible to operate the heater via the control box manually, once
the heater is re-connected to the WIFI, the smart phone will take control again.
4.2 Control box description:
Note: Please make sure the temperature sensor (Nr.8) is always pulled out during use.
4.3 Control via foot switch and manual buttons
Plug the power cable into the electricity outlet, activate the power switch (Nr.9) from position “0” to
“1”. Then press the foot switch until the power signal light on the power switch is on. Now the heater
is operating automatically at a preset room temperature of 37degrees and will start to heat. You are
now able to turn the heater on/off by pressing the foot switch. Of course, you can also change the
desired room temperature by pressing the “-” and “+” button.
4.4 Control via APP
4.4.1 How to download the Sundirect Smart APP
Scan the QR code on the right side to start the procedure to download the
APP, or you can download the APP “Sundirect Smart” on APP Store or Google
play, open the APP and register with your phone number or Email address.
7
1. Screen
2. Wi-Fi indicator
3. Timer indicator
4. ON/OFF button
5. “M” button
6. “+” button
7. “-” button
8. Temperature sensor
9. Power switch
10. Power cable
11. Foot switch
