User Manual
_______________________________________________________________________________
SunComm Technologies Co., Ltd.
29
4.8 Manipulaton Configuration
4.8.1 IP->Tel Destination Numbers
Figure 4-8-1 IP->Tel destination numbers manipulation
Table 4-8-1 Description of IP->Tel destination numbers manipulation
IP->Tel destination
numbers
manipulation
It is an optional configuration item, and is used to add a rule for
changing number
Index
It uniquely identifies a route. Its value is assigned globally, ranging
from 0 to 31.The route preferentially match the rules which the value
of index is smaller
Description
It describes the rule for the ease of identification. Its value is character
string
Source IP
It specifies the source IP which will send the calls to gateway
Any: any IP address
IP: specific an IP address
IP Group: specific an IP group
Source Prefix
All the caller number must match the source prefix. It specifies the
source prefix allow to send call out
Any: include anonymous, 0xxxx, 1[2-9]xxxx etc.
0xxxx: consist of some digits such as 015,08,09
1[3-8]6:consist of some prefix, include 136,146,156,166,176, 186
Destination Prefix
All the called number must match the destination prefix, the call
prefix indicates the connected number
Any: include anonymous, 0xxxx, 1[2-9]xxxx etc.
0xxxx: consist of some digits such as 015,08,09
1[3-8]6:consist of some prefix, include 136,146,156,166,176, 186
Destination
Its specifies destination Port or Port Group
Stripped Digits from
Left
It specifies the length of the digits to be deleted from left
Stripped Digits from
Right
It specifies the length of the digits to be deleted from right
Prefix to Add
Add the new digits in front of the original number
Suffix to Add
Add the new digits at the end of the original number
