SB-WM46
Installation Instructions
8
2.
Using 5/32” hex key (H), install four 1/4 x 5/8” button head
cap screws (K) through four 1/4” washers (L), faceplate (Z),
faceplate brackets (B or C), into four 1/4” nuts (M). Tighten
securely. (See Figure 8)
Figure 8
Install Faceplate to Display
1.
Align faceplate brackets (B or C) with interface brackets (D
or E), aligning the center of display with the faceplate bolt.
(See Figure 9) and (See Figure 10)
Figure 9
2.
Using 5/32" hex key (H), install eight 1/4 x 5/8” screws (K)
through eight 1/4” washers (L) and faceplate brackets (B or
C) into four backing plates (P). Tighten securely. (See
Figure 10)
2
(M) x 4
(K) x 4
2
7/16” (11.1mm)
(L) x 4
(short interface models shown)
faceplate bolt
1
(short interface models shown)
Figure 10
(P) x 4
(L) x 8
(K) x 8
2
1
(B or C) x 2
(short interface models shown)
