background image

2. Introduction

2.1 Product Overview

The SB-HDWT wireless system contains two main components: the HDWT-Tx transmitter 

and the HDWT-Rx receiver. The system transmits uncompressed video signals with 

resolution up to 1080p/60Hz with accompanying stereo audio. The HDWT-Tx transmitter 

connects via HD cable to standard video sources including a cable box, satellite receiver, 

Internet streaming box (Apple TV, Roku, etc.), a Blu-ray or DVD player, most video game 

consoles, and computers and tablets with HD output. The HDWT-Rx connects to any TV with 

HD input, and its weather-resistant design allows it to be used outdoors. The SB-HDWT can 

save users the trouble and expense of running video and audio cables through walls.

2.2 Product Features

l

 Working frequency range: 4.9 GHz - 5.9 GHz

l

 Compact transmitter and receiver designs

l

 Built in omnidirectional antennas

l

 USB connection for remote operation of USB keyboard/mouse/joystick

l

 Up to 100-foot range under specified condition, with very low latency

l

 Remote control and all necessary cables included

l

 Weatherproof receiver can be used outdoors

l

 Transmits/receives commands from standard IR remote controls

2.3 Package Contents 

Please make sure the following items are present in the package. If any items are missing or 

damaged, please call your SunBriteTV distributor.

HDWT-Rx receiver

HDWT-Rx transmitter

transmitter base

transmitter power supply

remote

control

quick start

guide

15-foot HD cable

6-foot HD cable

IR emitter

receiver

power cord

Содержание SB-HDWT














Отзывы: