![background image](http://html1.mh-extra.com/html/sunbeam/zumbo-mixmaster/zumbo-mixmaster_instruction-booklet_1394596012.webp)
11
Thermo cut-off – temperature overload
The mixer is equipped with a self-resetting
safety device which safeguards against
overheating the motor with excessive
loads. If overheating occurs, the mixer
will automatically activate the overheating
protection device and switch itself off. The
mixer will beep and the screen will flash
continuously. Switch the mixer off and
unplug it from the power point. Release the
mixer head and tilt it back until it is locked
into the tilt back position. Let the mixer rest
for 30 min.
Electronic protection cut-out
If the mixing load is too heavy for the
selected speed and prevents the attachment
from rotating, the mixer will cut-out to
prevent damage to the unit. If the LCD
screen flashes fast and continuously, the
motor has not been able to achieve or
maintain the set speed. In this case, unplug
the mixer and remove some of the mixture
from the bowl, working in batches.
Mixer head safety mechanism
The mixer head must be locked down or the
motor will not operate. If the mixer head is
tilted upwards during operation, the mixer
will automatically stop. This is a safety
mechanism to avoid injury. To resume your
mixing task, lock the mixer head back down
and press the
button.
Standby mode
The mixer will automatically switch off the
LCD screen after 20 minutes to save power.
To exit the standby mode, press any button or
turn the dial.
Safety Mechanisms