background image

1

Sunbeam’s Safety Precautions

1

Sunbeam’s Safety Precautions

    Sunbeam are very safety conscious when  

designing and manufacturing consumer products, 
but it is essential that the product user also 
exercise care when using an electrical appliance. 
Listed below are precautions which are essential 
for the safe use of an electrical appliance:

•  Read carefully and save all the instructions 

provided with an appliance.

•  Always turn the power off at the power outlet 

before you insert or remove a plug. Remove  
by grasping the plug - do not pull on the cord.

•  Turn the power off and remove the plug  

when the appliance is not in use and  
before cleaning.

•  Do not use your appliance with an extension 

cord unless this cord has been checked  
and tested by a qualified technician or  
service person.

•  Always use your appliance from a power  

outlet of the voltage (A.C. only) marked  
on the appliance.

•  This appliance is not intended for use by young 

children or infirm persons unless they have 
been adequately supervised by a responsible 
adult to ensure that they can use the appliance 
safely.

•  Never leave an appliance unattended while  

in use.

•  Young children should be supervised to ensure 

that they do not play with the appliance.

•  Do not use an appliance for any purpose  

other than its intended use.

•  Do not place an appliance on or near a hot gas 

flame, electric element or on a heated oven. 
Do not place on top of any other appliance.

•  Do not let the power cord of an appliance hang 

over the edge of a table or bench top or touch 
any hot surface.

•  For safety reasons and to avoid maintenance  

by unskilled persons, some appliances are 
‘sealed’ using tamperproof screws. Such 
appliances should always be returned to the 
nearest Sunbeam Appointed Service Centre  
for adjustment or repair if required.

•  Do not operate any electrical appliance with a 

damaged cord or after the appliance has been 
dropped or damaged in any manner. If damage 
is suspected, return the appliance to the 
nearest Sunbeam Appointed Service Centre  
for examination, repair or adjustment. 

•  For additional protection, Sunbeam 

recommend the use of a residual current 
device (RCD) with a tripping current not 
exceeding 30mA in the electrical circuit 
supplying power to your appliances.

•  Do not immerse the appliance in water  

or any other liquid unless recommended.

  SAFETY PRECAUTIONS FOR YOUR IRON.
•  Do not leave a hot iron within reach of 

children. If they come into contact with  
a hot iron it could lead to serious burns.

•  Iron only on an ironing board.
•  An iron takes approximately 30 minutes to  

cool down. Allow the iron to cool completely 
before storing.

•  Do not wind the cord around the  

soleplate while the iron is still hot.

•  Do not leave the iron unattended  

while it is plugged into the power outlet.

  If you have any concerns regarding the performance and use of your appliance,  

please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line. 

  Ensure the above safety precautions are understood.

Содержание Ultura 2600 Platinum









Отзывы: