SEMIAUTOMATIC DEFROST (ONE DOOR)
( FIG N° 10)
These models are equipped with semi-automatic defrosting system
(Push button).
They operate with a red button placed in the center of the temperature
control knob.
Press the red button once a week, during the night for your convenience,
this will increase the performance and save energy, the temperature
control can remain at its normal setting.
The ice will be eliminated from the freezer, and the water will be
collected in the tray below.
Once the freezer is free of ice, the refrigerator will start again
automatically and will reach the previously selected temperature.
Empty the tray of water and scraped-off ice.
In order to avoid condensation in this tray, we recommend you do not let
the frost build up; this will block the air flow in your refrigerator.
PAR IAL AUTOMATIC DEFROST (TWO DOORS)
T
( FIG N° 11)
Ensure that the defrosting of your freezer is carried out as quickly as
possible.
Remove all frozen food and wrap it in several layers of paper, place in
the fridge compartment or a cool environment, e.g. insulated ice chest.
Switch the power off at the wall, the temperature control can remain at its
normal setting.
Reduce defrosting time by placing a bowl of warm water in the freezer
compartment and leaving the door open.
Keep the refrigerator compartment door closed.
Empty out the water and scraped-off ice.
Wipe out and dry the freezer.
Replace the frozen food.
Switch the refrigerator on
DEFROST
MANUAL
DEFROST
AUTOMATIC
DEFROST
PUSH
BUTTON
DEFROSTING FREEZER
It is recommended that the freezer be defrosted when the frost is among 6 to 10 mm thick, to avoid excessive
accumulations of ice which affect performance and efficiency.
Do not use knives or any other sharp instrument to remove the ice, otherwise the freezer surface may become irreversibly
damaged.
Use a plastic spatula to remove any loose ice.
SEMIAUTOMATIC
In the two doors models use a flat screwdriver of 5 mm
width or similar to remove the correspondent shields
(control box and fan cover)
8
A) DEFROSTING TRAY
B) CONTROL BOX
C) FAN COVER
In one door models
remove the defrost pan and replace the lamp.
( FIG N° 9)
( FIG N° 10)
( FIG N° 11)
9
