Sunbeam Pro Glide SR8710, Руководство пользователя

Страница: 7 / 20

Before first use
Remove any adhesive stickers, plastic
covers or cardboard sleeves from the
soleplate. Ensure that all adhesive is
removed by rubbing the soleplate with a
cloth dampened with methylated spirits.
Fill the water tank and empty the water.
This will rinse out any foreign particles
remaining in the water tank from the
manufacturing process.
NOTE: When turned on for the first time,
your new iron may give off vapours
for up to 10 minutes. This is due to
the initial heating of the materials
used. It is safe, not detrimental to the
performance of the iron, and will not
reoccur.
NOTE: Ensure the steam generator is
always used and rested on a stable
surface. Do not move or shake the base
unit during use.
NOTE:
Sunbeam recommend using steam
generators with the SB8300 Couture
Ironing Board which has a metal tray
underneath the board specifically
designed for steam generators. This is
available from selected retailers.
Filling the steam generator tank with water
The tank can be removed and refilled
from the tap or using a jug through the
water inlet. Do not exceed the maximum
water level indicator. Ensure the water
inlet is closed and the water tank is
firmly in position.
NOTE: The boiler will not activate until
the water tank is in the correct position.
If the low water indicator remains
illuminated when the tank has been
replaced, slide the tank out and firmly
reinsert to ensure it is in the correct
position.
NOTE:
The non-corrosive stainless steel
boiler has been designed to allow you
to use tap water in your professional
ironing system. However in very hard
water areas, Sunbeam recommends the
use of distilled water, or water which
has been demineralised.
For best performance, we recommend
the use of Sunbeam Water Demineraliser
or Sunbeam Demineralised Water
available from selected retailers.
Do not fill the iron with fabric
conditioner, starches or any other
solution as these will damage the steam
mechanism. Do not use contaminated
water.
Using your Pro Glide
®
Steam Generator
5