English - 6
English - 7
8. When finished, move trigger switch up to release it from the lock-down
position.
9. Place Steamer on a flat surface and unplug from electrical outlet.
10. Wait until Steamer has cooled and empty water tank.
Note:
Always unplug the Steamer when not in use.
STEAMING HORIZONTALLY
You can also use your Steamer as an iron to refresh sheets, pillows, mattress,
sofas and more.
1. After the water tank is filled, make sure there is no residual water inside
the center water tank cavity. Attach the water tank to the Steamer.
Attach the steam guard accessory and follow step 3 under USING YOUR
STEAMER VERTICALLY.
2. Once the Steamer has reached set temperature, press trigger switch
and in a horizontal position, move the steamer continuously over the
fabric being steamed. For bed bug and dust mite treatment, follow the
NOTES in steps 3 and 7 under USING YOUR STEAMER VERTICALLY.
Caution:
The heated press bar gets hot, do not touch.
3. Once you finish, release the trigger and unplug the unit. Wait for unit
to cool completely before emptying the water tank or removing the
fabric brush.
SHOT OF STEAM
Shot of Steam
®
Feature provides an extra burst of steam for deep penetration
of stubborn wrinkles.
To use the SHOT OF STEAM
®
FEATURE: Press the trigger button twice within
1 second each time you would like an extra burst of steam.
The SHOT OF STEAM
®
feature may be used continuously in approximately 3
second intervals.
STEAMING TIPS
• Improper use of the Steamer can cause property damage due to the
steam. Always read the instructions in this manual before using your
Steamer.
• Do not operate the Steamer with an empty water tank. To add water
during operation, turn steamer off, wait for it to cool down then remove
water tank and refill.
• Always read the fabric care labels to help determine fabric type to be
steamed. If unsure of fabric’s fiber, test a small hidden area, such as an
inside seam or hem, before steaming.
• For more difficult wrinkles, try steaming from the underside of the fabric.
• When steaming, touching fabric lightly with the steam nozzle can help in
wrinkle removal. It is important to make contact with the garment and/or
fabric.
• Heavier fabrics require more steam.
• Only use water in the unit. Do not add cleaning solutions, scented
perfumes, oils or any other chemicals to the water that can cause damage
to the appliance.
• Do not use steam directly against wall or doors.
• When hanging garment on a door while steaming, be careful not to
damage the door with steam.
• After use, empty water tank by turning it upside down to ensure all water
empties out and avoid leaks.
• When steaming, move the steamer continuously over the item being
pressed. Do not keep steamer over an area for any period of time to
avoid damage to the fabric.
