Care and Cleaning.
Sunbeam is a Registered trademark. Made in China. Due to
minor changes in design or otherwise, the product you buy
may differ from the one shown in this booklet. Approved by
the appropriate Electrical Supply Authorities. Backed by
Sunbeam’s 12 Month Replacement Guarantee and National
Service Network.
© Copyright. SUNBEAM CORPORATION LIMITED 2001.
(INCORPORATED IN N.S.W.) A.C.N. 000 006 771
For more information or advice on any Sunbeam products,
contact the Sunbeam Consumer Service Line on 1800 025 059
in Australia. In New Zealand - contact the Sunbeam Office in
Auckland on 09 912 0747.
Always remove the plug from the power outlet
before cleaning.
Never immerse the kettle switch area or cord in
water, or allow moisture to come into contact
with these parts.
Removal of mineral deposits.
Mineral deposits in tap water may cause the
kettle interior to discolour. To remove this build-
up, use Sunbeam Liquid Descaler, a simple to
use, non-toxic cleaner available from Sunbeam
Service Centres.
Alternatively:
1. Fill the kettle with 3 cups of white vinegar
and the remainder with water and allow to
stand overnight. DO NOT BOIL.
2. Empty the solution from the kettle. Any
stains remaining inside the spout can be
removed by rubbing with a damp cloth. Fill
the kettle with clean water, bring to boil and
then discard the water. Repeat and the kettle
will then be ready to use.
The outside of the kettle can be wiped over
with a damp cloth.
CAUTION: Do not use chemical, steel wool, or
abrasive cleaners to clean the outside of the
kettle.
