Sunbeam KE2110, Руководство пользователя, Страница: 8 / 12

6
Always disconnect the kettle from the power
outlet before cleaning.
Never immerse the kettle switch area, cord or
power base in water, or allow moisture to
come into contact with these parts.
Descale Your Kettle Regularly.
Mineral deposits in tap water solidify when
the water is heated; lime scale may be white,
coloured, even rusty-looking and is normally
visible. Phosphate scale isn't generally visible
however it may cause the water to appear
cloudy when heated. This may cause the
interior of the water gauge to discolour, cause
overheating, trigger the boil-dry cut-out
mechanism or even reduce the kettle’s life.
Even in soft water areas it is important to
descale your kettle regularly to help maintain
its lifecycle.
NOTE: Failure to descale products regularly
can be deemed as negligent handling and
any faults caused by mineral build up will
not be covered by the Sunbeam 12 Month
Guarantee.
To remove this build-up, use Sunbeam Liquid
Descaler, a simple to use, non-toxic cleaner
available from Sunbeam Appointed Service
Agents.
Alternatively:
1. Fill the kettle with 1 cup of white vinegar
and the remainder with water and allow to
stand overnight. DO NOT BOIL.
2. Empty the solution from the kettle. Any
stains remaining inside the spout can be
removed by rubbing with a damp cloth. Fill
the kettle with clean water, bring to boil
and then discard the water. Repeat and the
kettle will then be ready to use.
Cleaning the concealed heating element
This kettle features a non-corrosive stainless
steel heating element. Over time, scale may
build up on the concealed element inside the
kettle, causing discolouration that may have
the appearance of rust. Be assured this is not
rust. If this occurs clean with a green
Scotchbrite
®
scourer or similar and a suitable
abrasive cleaning cream. Rinse and clean
thoroughly with tap water before using your
kettle again.
Looking after the Matte Finish exterior
The London range has a unique matte finish
with a hardwearing, durable paint. With
London’s luxurious matte finish a little extra
care is required to keep it looking its best.
Take care not to knock or damage the
paintwork, as this may result in areas where
the matte finish does not retain its original
character. Clean the exterior of the product
by wiping with a soft, lint-free damp cloth.
CAUTION: Do not use any polishing agents,
chemicals, steelwool or abrasive cleaning
products to clean the outside of the kettle as
these can damage the appearance.
To clean the mesh filter.
Grasp the top of the mesh filter and pull
upwards to remove. Wash in warm soapy
water and dry thoroughly before replacing
in the kettle.
Care and Cleaning