Sunbeam iced SDP1000 Series, Руководство пользователя

Страница: 5 / 10

3
Unpack your Iced Coffee Machine
1. Unpack your Iced Coffee Machine and
remove plastic bags, cartons and any tape
on the unit.
IMPORTANT: KEEP PLASTIC BAGS AWAY
FROM CHILDREN.
Clean Iced Coffee Machine before first use
CAUTION: To avoid potential damage to the
unit, do not plug in machine without water
in unit.
1. Wash the tumbler, lid, straw, coffee
filter and brew basket in a mixture of
mild detergent and water. Rinse each
thoroughly.
2. Start with the unit unplugged. Fill
tumbler with filtered water to the water
line and pour into reservoir. Place brew
basket in position and reusable coffee
filter into brew basket. Slide the No Drip
Lever to the open position.
3. Place tumbler under drip spout and plug
in. Switch on the unit at the rear and
press the BREW button. Ensure the LED
is illuminated.
4. When the cycle is complete and the
machine has been fully flushed, discard
the water from the tumbler and rinse
thoroughly with clean water.
5. Your Iced Coffee Machine is now ready
for use.
Let’s Make Iced Coffee!
1. Start with the unit unplugged.
WARNING: To prevent injury from hot
steam or potential damage to the unit,
do not plug the unit in until the water is
in the reservoir and the tumbler is put in
place under the drip spout (Step 9).
2. Fill the tumbler
10
to the “WATER”
marking with filtered water.
3. Lift the lid
5
of the unit and remove
the brew basket portion
7
, exposing the
water reservoir.
4. Pour the water into the reservoir
3
.
NOTE: Never fill water reservoir above
MAX fill line.
5. Place the brew basket back on top of the
reservoir. Place the reusable coffee filter
6
into the brew basket.
6. Slide No Drip Lever to open
8
.
7. Using the coffee scoop
9
, pour 1 level
scoop of grounds into the reusable coffee
filter. Close the lid.
NOTE: If you want a bolder cup of iced
coffee, you can use 1½ - 2 scoops of
grounds.
8. Fill the tumbler with large ice cubes to
the “ICE” marking.
9. Place tumbler under drip spout and plug
unit in. Switch on the unit at the rear and
press the “BREW” button
2
. Ensure the
LED is illuminated.
10. Wait 3-4 minutes for brewing to
complete. Once dripping slows and stops,
slide the No Drip Lever to closed to stop
the flow of coffee.
11. Add in your favorite coffee mix-ins for
coffee just how you like it.
12. Insert straw
11
in lid
12
, place lid on
tumbler and enjoy!
Let's get you started