4
Heading
Operating your coffee grinder
Before using the coffee grinder, wipe the
base exterior with a damp cloth. Wash the
bean hopper, hopper lid and ground coffee
container in warm soapy water, then rinse
and dry.
Note:
Do not immerse the burrs in water or
any other liquid.
Note:
Do not place any parts of the coffee
grinder in the dishwasher.
1. Place the coffee grinder base on a dry,
level surface.
Note:
Always ensure that the collar is
attached to the coffee grinder base first, then
attach the bean hopper.
2. Position the collar so that the notch on the
collar is aligned with the arrow on the rear
of the grinder base.
See figure 1
3. Now attach the bean hopper. Insert the
bean hopper by aligning the notches on
the base of the hopper with the guides on
the inside of the collar. Position until the
hopper sits flat. See figure 2.
4. To lock the collar and bean hopper into
place, hold the collar and turn it clockwise
until the ‘UNLOCK’ button releases.
See figure 3.
5. Fill the bean hopper with coffee beans.
Tip:
Remember to keep the hopper full at
all times. Having an even weight bearing
down on the burrs is important to ensure a
consistent grind.
Note:
This coffee grinder is intended to grind
whole coffee beans only.
6. Place the hopper lid onto the bean hopper.
7. Plug the power cord into a 230-240V AC
power outlet and switch the power on.
Figure 1
Figure 3
Figure 2
