Sunbeam ART0000922835, Руководство пользователя

Страница: 6 / 20

E10
For questions or support, please visit www.sunbeam.com (US) or www.sunbeam.ca (CA)
E11
For questions or support, please visit www.sunbeam.com (US) or www.sunbeam.ca (CA)
Voice Assistant Set Up
Pairing to Amazon Alexa & Google Voice Enabled Devices: Your heated bedding can be controlled through these
voice assistants.
1. Open the Sunbeam App.
2. Select the device you wish to connect to a voice assistant.
3. In the top right corner of the screen select the pencil icon.
4. Choose the icon of the Voice Assistant you wish to connect.
5. Follow the instructions that appear.
Voice Assistant Functionality
Your Sunbeam Connected Bedding is compatible with Amazon Alexa and Google Voice Enabled Devices.
Amazon Alexa Enabled Devices
Utilize the following command sequence:
“Alexa, “Primary Command” + “Device Name” + “Secondary Command” (if applicable)
For example,
“Alexa, Activate Sunbeam Bedding”
or
“Alexa, Turn Up Sunbeam Bedding by 4”
Note: The default “Device Name” is “Sunbeam Bedding”. If you have more than 1, it will become Sunbeam
Bedding 2, and so on...
For a complete list of commands, please visit the www.sunbeam.com or
www.sunbeam.ca website
Voice Assistant - Set Up & Functionality Additional In-App Features
Auto-off Timer: Choose when your Heated Bedding will turn off.
1. The in-app auto-off timer can be used to select the amount of time
for the bedding to stay on ranging from 30 minutes to 24 hours. The
default setting is 10 hours. To stay on constantly, click “stay on - 24
hours”. This will allow the bedding to stay on for 24 hours only. Click
the X to save the selection.
2. The timer will count down indicating the remaining time.
Schedule: The schedule feature can be used to automatically turn on
your bedding. You are able to set heat level, auto off timer (duration your
bedding stays on), day(s) you’d like the schedule to run. On Queen/King
sized bedding models, you will additionally be able to set these controls for
Side A and/or Side B.
You are able to save multiple schedules, turn them on or off, or delete them
using the schedule feature.
To Set Schedule:
1. Press Set Schedule
2. Select the time of day the heated bedding should turn on. Be sure to
chose the hour, minutes and AM/PM.
3 “ *On Queen and King models*, Click “Side Selection” and choose
Side A, Side B, or Both sides to select which side should turn on
during the schedule. Click the X to save the selection. If you want a
different heat setting for each side, set up 2 different schedules.
4. Click on Heat Setting, and select the desired heat setting. Click the X
to save the selection.
5. Click on Timer and select how long the bedding will stay on. Choose
between 0.5 and 10 hours. To stay on constantly, click “stay on - 24
hours”. This will allow the bedding to stay on for 24 hours only. Click
the X to save the selection.
6. Click “Day” and select which day of the week the schedule will be
active. Click the X to save the selection.
7. Press Save in the top right corner
8. Your saved schedule will appear on the schedule summary page
9. To turn off the schedule, press the slider button to the right. It will
change from red to gray to indicate the schedule is turned off. To turn the schedule back on, press the
slider button again. It will change from gray to red to indicate the schedule is turned on.
10. To delete a schedule, press the “Delete” button. A box will appear asking you to press “Delete” as final
confirmation. If you do not wish to delete the schedule, press “Cancel”.
Controlling Your Bedding Controlling Your Bedding
Action Command
Turn the bedding On “Activate”, “Power On”, “Turn on”, “Start”
Turn the bedding Off “Power Off”, “Turn Off”, “Deactivate”
Increase the heat settings Primary Command: “Turn Up”, “Raise”, “Increase”
Secondary Command: “by “#”
(input # of heat settings you want to increase by)
Decrease the heat settings Primary Command: “Turn Down”, “Lower”, “Decrease”
Secondary Command: ‘by “#” ‘
(input # of heat settings you want to decrease by)
Set the heat setting Primary: “Set”, “Change”
Secondary: “to #”
(input heat level # you want to set to)
Preheat On “Turn On Preheat”, “Start Preheat”, “Activate Preheat”
Preheat Off “Turn Off Preheat”, “Stop Preheat”, “Deactivate Preheat”