Sunbeam ALINEA KE2800, Руководство пользователя

Страница: 3 / 7

2
Features of your Kettle
3
If this kettle is filled above the maximum
level mark, hot water may be ejected from the
spout during boiling. Beware of steam coming
from the spout or lid especially during refilling.
Never open the lid when the kettle is boiling.
1. Plug the power base into a suitable
power outlet. NOTE: The kettle will turn
on and enter stand by mode until one of
the buttons on the base unit is pressed.
2. Remove your kettle from the power base
before filling it with water.
3. Fill your kettle with water. You can fill it
through the spout or by opening the lid.
Don’t overfill your kettle and always
ensure that there is sufficient water in
your kettle for it to operate correctly.
This is approximately 250ml or 1 teacup
full. Always check the water level when
your kettle is positioned on its power
base.
4. If opened previously, close the lid and
place your kettle back on the base.
5. The temperature touch pad on the base
unit of the kettle allows you to select
your required temperature of water for
the beverage you are making. Choose
your desired temperature by touching
one of the temperature buttons; the
selected temperture will illuminate and
heating will start.
6. The countdown timer on the base of the
unit will indicate the time left until your
kettle reaches the desired temperature.
The length of time the water takes to get
to temperature will vary depending on
the volume of water in the kettle and the
temperature selected. NOTE: If the
selected temperature is changed during
heating the lights and timer on the base
unit will automatically adjust
themselves. NOTE: Due to the variable
way in which heat energy transfers
through water the timer lights may not
extinguish at a steady rate. This is
normal and has no effect on the water
temperature.
7. When your kettle is heating, the stop
button, water level window and selected
temperature will illuminate. NOTE:
During heating the temperature of the
water will be indicated by the
illuminated temperature button. As the
temperature increases the buttons will
illuminate one by one.
8. When the water reaches the selected
temperature, your kettle will play a short
tune and the illumination will flash to
indicate the water is ready. (You have
the option to mute the tune).
9. Kettle will switch off automatically after
temperature is reached or if the kettle is
removed from the base during operation.
10. You may also switch your kettle off
manually at any time by pressing the
stop button again.
11. When the kettle is on the base it will
continue to monitor the water
temperature after the selected
temperature has been reached. The
current water temperature will be
indicated on the base unit with a slow
pulsing illumination of the temperature
button. Once the water temperature
drops below 80°C the base unit will
enter standby mode.
Using your kettle
1. Spout
2. Filter (behind spout)
3. Pull off lid
4. Water level window
5. 360° rotational power base with
cord storage
6. Stop button
7. Countdown timer
8. Temperature select buttons
9. Just Boil button
5
6 9
8
7
2
1
3
4