The HTTP port has default value of 80, and if you change
the default HTTP port, the url for logging into the camera
must be
http://IP:HTTP Port
.
Modify the settings as required. The following table describes some major
parameters.
3.2 Port Configuration
3.3 Email Alert
Click Setup > Network > Port.
Click Setup > Network > E-mail.
1
Double click the device name on the list to enable live viewing:
5
3.Network Setting
3.1 Change IP and fix the IP address of the camera
Click Setup > Network > Network.
Click Save.
- 07 -
Select Static from the Obtain IP Address drop-down list.
Enter the IP Address, Subnet Mask, and Defualt Gateway address
you would like to modify. Make sure the IP address of the camera is
unique on the network.
For SUNBA Performance Series IPC, HTTP port is equivalent to the ONVIF port. Please note
all ports must have unique value to each other.
2
After the configuration of E-mail, when alarms are riggered, the
camera will send messages with alarm snapshots to the specified
E-mail address.
3
Configure relevant parameters of the sender and the recipient. You
may end a test email after setting the recipient address. The following
table describes some major parameters.
