1
Cross Line
2
Enter Area
When configuring each smart event, please do not enable the function first. After all settings
are completed, click Save, and then enable it. When re-config it, you will also need to disable
the function, then re-config, save and enable it. It's to avoid that the camera will continue to
perform the function during the setting process, causing interference to the setting.
- 23 -
Cross line detection detects objects that cross a virtual line in live video and triggers alarm when such
an event is detected.
Detections included in Perimeter Protection cannot be enabled when the Object Detection, People
Counting or Auto Tracking is turned on.
10.1 Perimeter Protection
Set the Trigger Actions and Plan as required.
Trigger Actions:
Send E-mail: this will send an email notification for the alarm along with a snapshot. For details, see
Chapter 3.3.
Upload Image(Original): this will send snapshots to FTP server once the alarm is triggered. For details,
see Chapter 3.4.
Enter Area detection detects objects that enter a specified area, and triggers alarm when such an
event is detected.
Select Cross Line and
then click .
Please leave it disabled.
Set Detection Object type
and size.
In the Detection Rule area,
click to add a new line.
You can set the sensitivity,
level and the direction of
line cross that would trigger
an alarm.
2
1
3
Add a pre-designated view
as a home position preset,
please refer to Chapter 6.3
for detaills.
4
Click Save and then enable it.
5
