Note
If the TEMP ALERT switch located at the right side of the unit is in OFF position, the unit will not alert when the
meat temperature (MEAT) has reached the set temperature (SET TEMP).
Backlight:
Press any button to illuminate the screen for 30 seconds.
Safety Instructions:
Caution!
Use oven cloth or gloves when removing the probe from the meat. It will be hot!
Do not pull on the cable.
Clean the probe by wiping with damp cloth and kitchen cleaner.
Never immerse the unit with LC display in water.
Do not expose the plug of the probe or the plug socket on the thermometer/display unit to water, water
vapors or liquids. This will result in a bad connection and fault reading. Dry the plug thoroughly with a dry
cloth before every use.
Keep the probe cable away from oven elements, flames, coals, grill or oven racks – all of which can
reach temperature far higher than +350°C/+662°F (even if an oven is set lower). The probe cable can be
damaged at higher temperatures. The inner insulation will melt and the probe will short.
When using the item in outdoor BBQ grills or smokers, avoid pinching the cable between hot surfaces
such as a cast metal grill hood without some insulation protection. Use an access hole if available.
Avoid repeated kinking or twisting of the probe cable as this can break internal wires.
Handled with care, the probe should last a long time. Eventually, you may need to replace it.
Replacements are available over the Service Hotline.
General information:
Battery Ordinance:
Please note that the unit contains batteries. Batteries shall, by law, not be disposed of with
regular household waste. Please dispose of the batteries in a municipal collection. You may also
return the batteries to the manufacturer for disposal.
More information is available on the website of the Federal Ministry for the Environment Nature
Conservation and Nuclear Safety: www.bmu.de
