SET THE TIMER/STOPWATCH:
This device has a timer and a stopwatch which can be used inde-
pendently of the temperature measuring probe (H). The time can
be counted upwards or downwards when these functions are
being used. The maximum time which can be set on the timer is
99:59 (MIN:SEC).
TIMER:
To count time downwards, press MIN- (2g) or the SEC key (2f)
until the required time is displayed. Pressing and holding these
keys will speed up the time setting process. Then press the
GO / STOP key (2a) to start the timer. When the timer has run
down, 0M:00S will flash in the LC display (5) and the device will
start to beep.
STOPWATCH:
To count the time upwards (stopwatch), press the GO / STOP key
(2a) without first setting the time.
• For both these functions, press the GO / STOP key (2a) to stop
the selected count.
• You can reset both functions automatically to 00M:00S by
pressing the RESET key (2b).
If you are no longer using the device, slide the two On/Off
switches (1 / A) into the "OFF" position and remove the batteries
if you are not planning to use the device for a lengthy period.
14
GB