
25.
The use of attachments or accessories not recommended or sold by the product distributor may cause personal or
property hazards or injuries.
26.
This product is intended for normal domestic/household use only and only to be used on the floor.
27.
Do not mount on ceilings or walls.
28.
Use this heater as described in this manual. Any other uses, not recommended by the manufacturer, may cause fire,
electric shock, or injury to persons and may void the warranty.
L
OCATION
1.
The appliance should be placed a minimum distance of 2 metres away from flammable and combustible materials (e.g.
curtains), walls or other structures.
P
OWER
C
ORD
1.
Do not lay the cord under carpet, rugs, mats or similar articles. Position the cord so that it does not pose an obstruction or
a tripping hazard.
2.
Always pull the plug out of the socket do not pull the cord!
3.
Always disconnect the mains plug when the appliance is not in use. Attention! The appliance may only be used in normal
domestic instances and not for industrial use.
B
EFORE
F
IRST
U
SE
1.
Before first use, remove all packaging and inspect the appliance for any damage. If there appears to be any damage,
please take the unit back to place of purchase for a replacement.
2.
Ensure that all the accessories are included as per the diagram below before continuing with the installation.
3.
Ensure that the location of the heater is not directly under a power socket and that a power socket is available to power
the appliance.
U
SING
T
HE
H
EATER
1.
Carefully remove the heater from the packaging.
2.
Place the heater on a firm level surface, away from any obstructions or combustible materials.
3.
Ensure the unit is turned “Off”. Plug the cord into a power outlet.
4.
Once plugged in, press the On/Off Button at the bottom of the unit to turn it on.
Figure1
Figure 2
Fan mode:
M
ANUAL
/R
EMOTE
O
PERATION
:
1.
Press the ON/OFF button at the top of the unit, the fan heater will switch ON and the fan will blow. The COOL AIR
indicator will illuminate.
2.
To switch the fan OFF, press the ON/OFF button. The unit will continue to operate for 10 -15 seconds, and then it will
switch OFF.