sun valley MSTBVN Скачать руководство пользователя страница 15

15

107281

OWNER’S MANUAL

For more information, visit www.desatech.com

STOVE AND B-VENT
BURNER SYSTEM
INSTALLATION

Continued

Continued

4.

Check all joints of gas supply piping
system. Apply commercial leak test so-
lution to all gas joints. Bubbles forming
show a leak. Correct all leaks at once.

5.

Reconnect burner system and equip-
ment shutoff valve to gas supply. Check
reconnected fittings for leaks.

Test Pressures Equal To or Less Than
1/2 PSIG (3.5 kPa)

1.

Close equipment shutoff valve (see
Figure 33).

2.

Pressurize supply piping system by ei-
ther opening propane/LP supply tank
valve for propane/LP gas burner sys-
tem or opening main gas valve located
on or near gas meter for natural gas
burner system, or using compressed air.

3.

Check all joints from propane/LP sup-
ply tank or gas meter to equipment
shutoff valve (see Figure 34 for pro-
pane/LP or Figure 35 for natural). Ap-
ply commercial leak test solution to all
gas joints. Bubbles forming show a
leak. Correct all leaks at once.

Pressure Testing Burner
System Gas Connections

1.

Open equipment shutoff valve (see Fig-
ure 33).

2.

Open propane/LP supply tank valve for
propane/LP burner system or  main gas
valve located on or near gas meter for
natural gas burner system.

3.

Make sure control knob of burner sys-
tem is in the OFF position.

4.

Check all joints from equipment shutoff
valve to thermostat gas valve (see Fig-
ure 34 for propane/LP or Figure 35 for
natural). Apply commercial leak test so-
lution to all gas joints. Bubbles forming
show a leak. Correct all leaks at once.

5.

Light burner system (see Lighting In-
structions
, page 19). Check all other in-
ternal joints for leaks.

6.

Turn off burner system (see To Turn Off
Gas to Appliance
, page 19).

Figure 33 - Equipment Shutoff Valve

ON

POSITION

OFF

POSITION

Open

Closed

Equipment
Shutoff
Valve

Figure 34 - Checking Gas Joints for Propane/LP Gas Burner System

Propane/LP
Supply Tank

Equipment
Shutoff
Valve

Gas Valve

Equipment
Shutoff Valve

Gas Valve

Gas Meter

Figure 35 - Checking Gas Joints for Natural Gas Burner System

Содержание MSTBVN

































Отзывы: