3.4 Battery Information
Your pager use 1 ‘AA’alkaline battery. Check the battery gauge in the Vital Signs menu.
If is displayed to the down of the screen, the battery is low.
If is displayed, you cannot receive messages but you can still read unread messages.
3.5 Installing/Replacing the Battery
1. Holding the pager face down. Push and slide the battery door.
Lift up the battery door to open.
2. Remove the old battery, noting the polarity.
3. Insert a new battery so the positive (+) and negative (-) polarity markings on the battery
match the polarity diagram near the battery compartment.
4. Replace the battery door cover.
10
3. Getting Started
3. Getting Started
CAUTION:
Note the polarity markings (+) and (-).
Do not insert the battery backwards.
Push
11
