Location of Parts
3.
Lift the top hinge straight up to free the in from the socket on the top of
the door.
4.
Lift the freezer door and place it on a padded surface to prevent scratching
it.
5.
Remove the plug buttons from the upper left holes as illustrated and
transfer them to the uncovered holes at the right side. Be sure to press the
plug buttons firmly into the holes.
6.
Unscrew the middle hinge. Keep these for later use.
7.
Take off the refrigerator door and place it on a padded surface to prevent
scratching.
8.
Unscrew the lower hinge.
9.
Lay the appliance on its back on the floor. Remove, change and replace the
bottom hinge and plugs to the opposite side.
10.
Stand the unit upright and replace the refrigerator door.
11.
Insert the bottom of the middle hinge into the top of the refrigerator door.
With the door open, screw the middle hinge into the uncovered holes.
12.
Place the bottom of the freezer door into the top of the middle hinge.
13.
Replace the top hinge in the uncovered holes on the top left side of the
freezer. Do not tighten.
14.
Should the gasket seals not adhere to the casing of the appliance
perfectly, they will have to be heated from a suitable distance (by means of
a hair drier, for example) and lightly stretched to the required height.
Refrigerator/
Freezer
compartment
Freezer / refrigerator
compartment
with shelf
Temperature control
dial (thermostat),
light switch and
interior light
Glass shelf
Front ventilation
slots (kick plate)
Leveling legs
Refrigerator
door with
storage
compartments
Wire shelving
Defrost water outlet
Upper compartment temperature
control dial (thermostat),
light switch and interior light
Page 1
1. Upper hinge
2. Middle hinge
3. Lower hinge
4. Kick plate
5. Door hinge plug
Page 6
Содержание Model ST-16RF
Страница 1: ...Model ST 16RF Owner s Manual...
