Fit Adjustment
1.
Adjusting Seat and Boom
1.
The goal is for your seat (and therefore your weight) to be as far back as possible when your set up is complete.
2.
Loosen and slide the #10 Seat Frame Assembly rearward on the Main Frame until in a comfortable seating position. Adjust the seat
angle by removing and reinstalling the #27 Strut Pins into a new position on the Seat Struts if necessary. See Figure Q.
3.
Loosen the Crank Boom Clamp Bolts and position the boom so that when seated, your knee should be just slightly bent when the forward
foot is in the farthest position. See Figure R.
4.
Re-tighten the Crank Boom Clamp Bolts to the specified torque setting.
5.
If you cannot extend your leg forward enough, you can then move the seat forward to get the proper fit.
Note:
Your chain may need to be lengthened or shortened depending on your final seat and boom position.
Seat struts can be trimmed and re-drilled as necessary to provide a perfect fit.
Q
R
Q
R
