Cable Guide Installation
1.
Installing Cable Ties
Thread 2 #21 Cable Ties over the #15 Quick Release Seat Pin and zip them onto the pin. Trim the ties and route the rear brake and
derailleur cable through the eye of the cable tie. See Figure O.
Pedal Installation
1.
Installing Pedals
Apply grease to the threads of the pedal spindle. This will protect both the threads of the pedal and crank arm over time.
Use pedal washers where required.
Using your hands, thread the pedal spindle into the crank arm by turning it toward the front of the bike.
Once the threads catch use your pedal wrench to finish tightening down the pedals. See Figure P.
Torque down the pedals to a minimum of 300 in-lbs of torque.
O
P
