Instructions for:
Hydraulic Air Pump
Models:SPA-554TQ
Page:E1
1. SAFETY PRECAUTIONS
IMPORTANT :
Minimum age of the
operator must be 18 years The operator
must have read and understood all
instructions, safety issues, cautions and
warnings before starting to operate the
SUN RUN equipment. The operator is
responsible for this activity towards other
persons.
WARNING :
To avoid personal injury and
possible equipment damage, make sure all
hydraulic components withstand the
maximum pressure of 700 bar(10,000psi).
!
WARNING:
Always wear safety glasses.
The operator must take precaution against
injury due to failure the tool or workpiece.
CAUTION:
Avoid sharp bends and kinks
that will cause severe back-up pressure in
hoses. Bends and kinks lead to premature
hose failure.
DO NOT
drop heavy objects on hose. A
sharp impact may cause internal damage to
hose wire strands. Applying pressure to a
damaged hose may cause it to rupture.
IMPORTANT:
Do not lift hydraulic
equipment by the hoses or couplers. Use
the carrying handle or other means of safe
transport.
DANGER:
Do not handle pressurized
hoses. Escaping oil under pressure can
penetrate the skin causing serious injury. If
oil is injected under the skin, see a doctor
immediately.
WARNING:
Immediately replace worn or
damaged parts with genuine SUN RUN
parts. SUN RUN parts are designed to fit
properly and withstand rated loads.
IMPORTANT:
Hydraulic equipment must
only be serviced by a qualified hydraulic
technician. For repair service, contact the
SUN RUN Service Center in your area. To
protect your warranty, use only SUN RUN oil.
WARNING:
Never pressurize uncoupled
couplers. Only use hydraulic equipment in
a coupled system.
Fail to comply with the following cautions
and warnings could cause equipment
damage and personal injury.
R
CHU LUN SING CO.,LTD
!
!
!
!
WARNING :
The system operating pressure
must not exceed the pressure rating of the
lowest rated component in the system. Install
pressure gauges in the system to monitor
operating pressure. It is your window to what
is happening in the system.
WARNING:
To avoid personal injuries and
equipment damage, do not remove the
shroud of the wrench. Do not modify any
component of the wrench. Do not change the
relief valve which is inside the swivel
couplings.
CAUTION:
The incorrect system connection
will cause failure and danger. Before
connection, make sure the swivel couplings
being clean. After application, the swivel
couplings must be put on the dust caps.
CAUTION:
Do not use worn socket and
square drive.
CAUTION:
Please use the socket of good
performance.
