Connecting Cables
45
FIGURE:
SER MGT port – Rear Panel
This port is needed to set up the NET MGT port.
When connecting a DB-9 cable, use an RJ-45 to DB-9 adapter to perform the
crossovers given for each connector.
Note –
Use the SER MGT port
only
for server management. This port is the default
connection between the SP and a terminal or a computer.
Caution –
Do not attach a modem to this port.
Related Information
■
“Connect the NET MGT Port Cable” on page 45
■
“Connecting Cables” on page 39
▼
Connect the NET MGT Port Cable
The NET MGT port is located just to the right of the SER MGT port on the rear panel.
●
Connect a Category 5 cable from the NET MGT port to your network switch or
hub.
