Sun Microsystems x4422a, Руководство пользователя

Страница: 31 / 96

Chapter 2 Installing the Adapter 13
8. List the network devices on your system.
Use the
show-nets
command to list the system devices. You should see the full
path name of the
network
devices, similar to the example below. In this example,
the
network@0
and the
network@1
devices are the Sun Dual Gigabit Ethernet and
Dual SCSI/P adapter and the
network@2
is the onboard Ethernet device.
■
network@0 identifies the first Ethernet port
■
network@1 identifies the second Ethernet port.
Note – If you do not see the device listed, check that the adapter is properly seated
and, if necessary, reinstall the adapter.
9. View the device that you installed.
Using the previous example, type:
ok show-nets
ok show-nets
a) /pci@1f,700000/network@2
b) /pci@1e,600000/pci@4/network@1
c) /pci@1e,600000/pci@4/network@0
q) NO SELECTION
Enter Selection, q to quit: b
cd /pci@1e,600000/pci@4/network@1