Sun Microsystems Sun StorageTek SL24, Начало работы, Страница: 5 / 12

2 Determining your rack type
11420
You will need a #2 Phillips screwdriver, a small flat screwdriver, the
two rack rails, and the hardware packets for your rack.
Racks having vertical mounting rails with 10–32 threaded holes in the
rack column (Sun StorEdge Expansion Cabinet).
• You will need the Standard rack hardware packet and the packet
of alignment pins marked 10–32 threaded ‐ hole rack .
Racks having M6 threaded holes in the rack column (Sun Rack 900
and 1000).
• You will need the Standard rack hardware packet.
Racks having 9.5 mm square holes in the rack column (Sun
StorageTek Rack).
• You will need the Standard rack hardware packet and the packet
of alignment pins and clip nuts marked 9.5 mm square ‐ hole rack .
Customizing the rails for 10–32
threaded
‐ hole racks
11421
Using a flat screwdriver, replace the two alignment pins on the front
and back of each rail with the pins from the
10–32 threaded ‐ hole
rack packet.
Customizing the rails for M6
threaded
‐ hole racks
11422
Insert a clip nut from the Standard rack hardware packet onto the
back of the large hole on the front of each rail.
Customizing the rails for 9.5 mm square ‐ hole
racks
11421
Using a flat screwdriver, replace the two alignment pins on the front
and back of each rail with the pins from the
9.5 mm threaded ‐ hole
rack packet.
11422
Insert a clip nut from the Standard rack hardware packet onto the
back of the large hole on the front of each rail.
Page 5