Sun StorageTek™ SL24 Tape
Autoloader
Getting started
© Copyright 2008 Sun Microsystems, Inc., 4150 Network Circle,
Santa Clara, California 95054, U.S.A. All rights reserved. Sun
StorageTek™ SL24 Tape Autoloader and Sun StorageTek™ SL48
Tape Library are trademarks of Sun Microsystems, Inc. Other
trademarks may be mentioned herein which belong to other
companies.
Fourth edition: October 2008
The information in this document is subject to change without
notice.
Printed in the US
www.sun.com
AH945-96057
IMPORTANT:
Shipping Lock:
The shipping lock must be removed for the
robotics to work properly.
A robot move error is displayed if the
shipping lock is not removed. See Step 1, Removing and storing
the shipping lock.
WARNING!
The Sun StorageTek
™
SL24 Tape Autoloader weighs 15.6 kg (34.3
lb) without media and 20.4 kg (44.9 lb) with media (24 cartridges).
When moving the Autoloader, to reduce the risk of personal injury
or damage to the device:
•
Observe local health and safety requirements and guidelines
for manual material handling.
•
Remove all tapes to reduce the overall weight of the device.
•
Obtain adequate assistance to lift and stabilize the device during
installation or removal.
WARNING!
When placing the Autoloader into a rack, to reduce the risk of
personal injury or damage to equipment:
•
Extend the rack’s leveling jacks to the floor.
•
Ensure that the full weight of the rack rests on the leveling jacks.
•
Install stabilizing feet on the rack.
•
Extend only one rack component at a time. Racks may become
unstable if more than one component is extended.
Page 1
