Sun Microsystems SUN NETRA CP3000 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 72

Sun Microsystems SUN NETRA CP3000 Скачать руководство пользователя страница 22

1-12

Sun Netra CP3000 Advanced Mezzanine Card PCIe Hard Drive and SAS Controller User’s Guide • March 2010

Caution –

Failure to fill all slots with AMCs or cover with filler panels can

negatively impact the cooling of the system.

1.6.2

Removing a Blade Server and AMC

Following are the instructions for removing a blade server and installed AMC. For
additional information, refer to your blade server documentation.

Caution –

Before removing a blade server and AMC, read all cautions, warnings,

and instructions presented earlier in this chapter.

1. Move the front cable management bracket to the lower position (

FIGURE 1-4

).

FIGURE 1-4

Front Cable Management Bracket in Lower Position

2. Disengage the injector/ejector mechanisms at the top and bottom of the blade

server to notify software that the board is about to be removed. Wait for the
Hot-Swap LED to light.

«
...
20
21
22
23
24
...
»

Содержание SUN NETRA CP3000









































































Отзывы:

Нет отзывов