Sun Microsystems SUN FIRE X4500, Руководство пользователя

Страница: 8 / 24

2 Sun Fire X4500 Server Guide for Preinstalled Solaris 10 OS • February 2007
Before You Begin
Before you begin configuring the preinstalled OS, do the following:
1. Perform initial configuration of the server’s Integrated Lights Out Manager
(ILOM) Service Processor (SP) and determine the server’s network settings, as
described in the
Sun Fire X4500 Installation Guide .
2. Gather the information that you will need for the configuration, as listed in
“Gathering Information for the Installation Worksheet” on page 2 . Note that
default values are indicated by an asterisk (*).
Gathering Information for the Installation
Worksheet
Use the worksheet in
TABLE 1-1
to gather the information that you need for
configuring the preinstalled Solaris OS.
Finding the IO Board and SP MAC Addresses
The IO board and SP MAC addresses are printed on their respective PC boards, but
these are also printed on the system controller handle.
■
The SP MAC address is on the left side of the handle. Look for the label that says
“SP MAC ID”.
■
The IO board MAC address is on the right side of the handle. Look for the label
that says “Net 0 MAC ID.”
Note –
If the cable management arm (CMA) is in place, it can obscure these
addresses. To view the MAC address labels when the CMA is in place, use a stylus
to press the recessed button to release the system controller handle, and swivel it
down partway until the addresses are visible. Return it to the closed position when
you are done.