Sun Microsystems Sun Fire V445, Руководство по установке

Страница: 61 / 66

Appendix A Installation Reference 49
Note – The system controller is accessed through the serial management port by
default. You must reconfigure the system controller to use the network management
port. For more information, see the
Sun Fire V445 Server Administration Guide .
The network management port has indicators which operate as described in
TABLE A-3
.
Serial Management Port
The serial management port provides the default connection to the system controller.
The serial management port is an RJ-45 connector that can be accessed from the back
panel. You can connect to the serial management port using a VT100 terminal, a tip
connection, or a terminal server.
FIGURE A-5
Serial management port
For serial management port connector signals, see
TABLE A-4
.
TABLE A-3
Network Management Port indicator
Name Description
Link This green indicator is lit when an Ethernet connection is
present.
Activity This green indicator is lit when the Ethernet connection is
active.
TABLE A-4
Serial Management Connector Signals
Pin Signal Description Pin Signal Description
1 Request to Send 5 Ground