Sun Microsystems Sun Fire E2900, Руководство по соблюдению требований и безопасности

Страница: 24 / 126

20 Sun Fire E2900 Systems Compliance and Safety Manual • March 2004
Safety Requirements
For protection, observe the following safety precautions when setting up the
equipment:
■
Follow all cautions, warnings and instructions marked on the equipment.
■
Ensure that the voltages and frequency rating of your power source match the
voltage and frequency inscribed on electrical rating label attached to the
equipment.
■
Never push objects of any kind through openings in the equipment. They may
touch dangerous voltage points or short components, resulting in fire, electric
shock, or damage to your equipment.
■
Refer servicing of equipment to qualified personnel.
Lifting
Caution –
Owing to the weight of the system, do not attempt to install it in or
remove it from a rack without an appropriate lifting device. At least three other
persons must be available if an appropriate lifting device is not to be used.
Modifications to Equipment
Because of the danger of introducing additional hazards and/or the possibility of
compromising emissions compliance, do not install substitute parts or perform any
unauthorized modification of the equipment. Contact your local support
organization for service and repair to ensure that safety features are maintained.
Sun Microsystems is not responsible for regulatory compliance of a Modified Sun
product.
Placement
Caution – Do not block or cover the openings of your Sun product. Never place a
Sun product near a radiator or heat register. Failure to follow these guidelines can
cause overheating and affect the reliability of your Sun product.