Inspecting the System Controller CPU Board for
the System Control Board
Note –
Prior to installation, Sun Microsystem technicians need to reference
Infodoc 72037 for the required system controller CPU upgrade information.
Inspect the new board before inserting it into your Sun Fire system.
1. Remove the connector protective cover from the board being installed
and inspect the connector for any damage or gaps between the pins.
2. Ensure the board alignment tabs are not bent.
3. Inspect the mating connector before inserting the new board.
Caution –
Do not force any board into a slot; it can cause damage to
the board and the system. The board should insert and seat
smoothly. If it binds, remove the board and inspect the card cage slot
for any obvious obstructions.
