Sun Microsystems Sun Fire 880, Руководство по монтажу в стойку

Страница: 5 / 231

en-1
C H A P T E R
1
Getting Started
This guide shows you how to install the Sun Fire
TM
880 server into a 19-inch (48.26-
cm) wide Electronic Industries Association (EIA)-compliant rack or cabinet. After
you install the server into the cabinet according to the instructions in this guide, see
the
Sun Fire 880 Server Owner’s Guide for information about system setup and
software installation.
To install the server into a cabinet, complete the following tasks:
■
Unpack and verify the contents of the rackmounting kit. See “Unpacking the Kit”
on page en-1 and “Inventory” on page en-2.
■
Install the server into the cabinet. See Chapter 2.
Note –
To illustrate the procedures, this guide shows the server being installed into
a Sun Microsystems
TM
cabinet.
Unpacking the Kit
The rackmounting kit is shipped from the factory in one carton.
Inspect the shipping carton for physical damage. If the carton is damaged, request
that the carrier’s agent be present when the carton is opened. Keep all contents and
packing material for the agent’s inspection.
Check that you received the complete kit. See “Inventory” on page en-2. Contact Sun
Microsystems or your distributor/reseller if any parts are missing.