Sun Microsystems Sun Fire 12K, Руководство по планировке объекта

Страница: 15 / 100

1-1
C H A P T E R
1
Physical Specifications
Sun Fire 15K/12K systems come with various environmental requirements. Review
the site preparation process flow diagram shown in
FIGURE 1-1
as you begin to
evaluate the needed requirements before your system installation.
FIGURE 1-1
Site Preparation Process
Determine the type and amount
of power receptacles needed
(
TABLE 3-1 and TABLE 3-3 ).
Determine the amount of cooling
needed by reviewing the system
cabinet power and cooling
requirement ( TABLE 2-2 ).
Obtain system
configuration from
sales engineer.
Determine the type and amount of networking cables
needed. Determine all dynamic system domain
information by reviewing TABLE 4-2 ( Section 4.2,
“System Setup Information” on page 4-2 ).
Determine the space requirements and
location of the system ( TABLE 1-1 ,
FIGURE 1-3 , FIGURE 1-4 , and
FIGURE 1-5 ).
Schedule all necessary
modifications and obtain
any necessary hardware.
Plan for equipment arrival
( Section 1.6, “Planning Your
Access Route” on page 1-13 ).
Complete and review all
worksheets and checklists in
Chapter 5, "Site Planning Checklist."
Schedule the installation date
based on the anticipated comple-
tion date of site and system arrival.
For Sun service personnel, fill out and return
the electronic Installation Report by email,
http://esp.West.Sun.COM/sunfire1
5k_hw_pubs/
02_Install_Report/