Sun Microsystems Sun Enterprise 4000, Руководство по модернизации

Страница: 11 / 28

1
System Upgrade Procedure
This chapter gives detailed instructions for upgrading your Sun Enterprise 4000
system. The upgrade procedure includes:
■
Powering off the system—page 1
■
Removing all Boards and Assemblies—page 2
■
Removing the Outer Panels—page 5
■
Replacing the Centerplane—page 5
■
Replacing the Outer Panels
■
Replacing all Boards and Assemblies—page 12
■
Replacing the Clock Board—page 13
■
Replacing the CD-ROM Drive—page 15
■
Updating the System Flash PROM—page 14
■
Powering on the System—page 17
Powering Off the System
1. Halt the system using the appropriate commands and wait for the system-halted
message and the boot monitor prompt.
Refer to the Solaris Handbook for SMCC Peripherals that corresponds to your operating
system.
Caution – Failure to halt the operating system properly can result in a loss of disk
drive data.
2. Turn off the system power in this order:
a. External drives and expansion cabinets (if any)
b. System cabinet