Replacing a hard disk drive
Upgrading the Hardware—Sun Cobalt Control Station
7
Replacing a hard disk drive
If a hard disk drive fails in your Sun Cobalt Control Station, you can replace the
drive.
Specifications for a hard disk drive
Sun Microsystems™ recommends that the hard disk drive you select meet the
specifications listed in Table 1. A hard disk drive that does not meet these
specifications can cause reliability problems in your server.
Table 1.
Specifications for the hard disk drive
Specification Value
Peak current draw
Must not exceed:
1.8 amperes max (at 12 volts)
0.7 amperes max (at 5 volts)
Rotational speed
5400 rpm
Interface
Ultra ATA-33 EIDE or faster
Operating temperature
Must be able to operate in environments up to
55° C
Operating humidity
10% to 90% (non-condensing)
