Sun Microsystems Sun Blade X6440 s, Руководство по установке

Страница: 61 / 68

Chapter 7 Installing a Windows Server 2003 Image From a RIS Server 53
■
For an on-board NVidia controller, add the following entries:
5. To add the
$oem$
directory and its subdirectories to the RIS image directory,
perform the following steps:
a. Add the
$oem$
directory to the RIS image directory located at
D:\RemoteInstall\Setup\English\Images\
image_dir
Where image_dir is the directory on the RIS server that contains the RIS image.
b. Create the following subdirectories under the
$oem$
directory:
\$1\drivers
\textmode
c. Create the following subdirectories under the
\$1\drivers
directory:
\nic\intel
\nic\nvidia
\sata_ide
\smbus
\tpm
\video
6. Depending on the type of controller in the RIS server, use one of the following
procedures to copy the driver files into the
$oem$
directory tree:
[Unattended]
DriverSigningPolicy = Ignore
OemPnPDriversPath = "\drivers\nic\intel;\drivers\nic\nvidia;\
\drivers\smbus;\drivers\tpm;\drivers\video"
[MassStorageDrivers]
"NVIDIA RAID CLASS DRIVER (required)"="OEM"
"NVIDIA nForce Storage Controller (required)"="OEM"
[OEMBootFiles]
txtsetup.oem
disk1
nvata64.inf
nvata64.sys
nvata.cat
nvatax64.sys
nvraid.cat
nvrdx64.inf
nvrdx64.sys
[UserData]
ProductKey = XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
[Identification]
JoinWorkgroup = WORKGROUP